![]() ![]() The usual solution is to install a high-pass broadcast-reject filter at the receiver input, attenuating the unwanted AM signals below 1.6 MHz while passing the desired 160 meter signals with little attenuation. Antennas for those frequencies pick up a lot of AM band RF, overloading the input circuits and creating distortion or false signals inside the receiver. Hams often experience fundamental overload on the 160 meter band (1.8–2.0 MHz) which is adjacent to the AM broadcast (BC) band (550 kHz–1.7 MHz). ![]() ![]() The AM signal is completely legal but just too strong, disrupting the function of the receiver or overriding the desired programming. The receiver might be a wireless telephone, a scanner, or even a TV or radio receiver. It occurs when a receiving device is functioning entirely properly but unable to reject a strong signal. If you’ve ever lived close to an AM broadcast station, you probably experienced the phenomenon known as fundamental overload. » Skip to the Extras Once you start, it’s hard to stop! ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |